Wireless vehicle detection for automatic gates, barriers, and parking control. The eLoop range replaces buried inductive loops with two mounting options: surface-mount sensors that fix directly to the driveway, and in-ground sensors that drop into a single core-drilled hole. Either way there’s no continuous loop trench — no saw-cut perimeter, no sealant runs, no re-paving.
Suited to HOA and gated community entrances, commercial yards, and retrofit installations where trenching isn’t practical. Free-exit, safety, and presence detection, plus transceivers, transmitters, and mounting accessories to complete the system.
Vehicle Detection
Showing all 16 results
-
Transceivers & Remotes, Vehicle Detection
AES Diagnostic Remote | AES-EDR00
The Diagnostics Remote is an essential tool for installers working regularly with e-Loop systems, providing fast, wireless access to advanced configuration and diagnostic features. Designed for ease of use in the field, the remote allows users to view real-time data, adjust performance variables, and troubleshoot with confidence. Once placed on top of an e-Loop and connected, it delivers near-instant feedback, enabling live monitoring and fine-tuning without the need for direct access or disassembly.
-
Connects wirelessly to any e-Loop
-
Real-Time Data Transmission for Live Diagnostics
-
Adjust Trip Level Thresholds
-
Fine-Tune Sensitivity per Axis (X/Y)
-
Calibrate e-Loop Devices On-Site
-
Change Operational Modes with Ease
-
Scan for Background RF Interference
-
Simple One-Touch Connection Process
-
User-Friendly Menu Navigation
SKU: EDR00 -
-
Vehicle Detection
AES E-Loop Commercial Radar Loop Kit (PRESENCE MODE) with eTrans 50 | AES-EL00C-RAD-K
Vehicle DetectionAES E-Loop Commercial Radar Loop Kit (PRESENCE MODE) with eTrans 50 | AES-EL00C-RAD-K
Presence Mode with added radar protection.
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure A safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Note: Gate or door controller must have a dedicated open input and auto close function enabled.
Includes
1 x e-Loop commercial Presence mode wireless detection module
1 x single-channel transceiver (Trans-50)
2 x Dyna boltsSKU: EL00C-RAD-K -
Vehicle Detection
AES Commercial Radar E-Loop Kit with eTrans 200 (Presence Mode) – EL00C-RAD-KLT
Presence Mode with added radar protection.
The E-loop commercial is the epitome of perfection when it comes to wireless vehicle detection systems designed specifically for commercial settings. With its wireless nature, installation becomes a breeze, eliminating the need for complex wiring systems and minimizing disruption to the existing infrastructure. Moreover, the system’s efficient energy consumption and low maintenance needs make it a cost-effective solution that ensures long-term reliability.
Additionally, the E-loop commercial is available with a convenient presence mode, which intelligently keeps gates and barriers open for an extended duration when longer vehicles are in motion over the detection area. This advanced functionality enhances safety and efficiency by minimizing interruptions and reducing the risk of collisions, further solidifying its suitability for commercial environments.
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched, and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure A safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Note: Gate or door controller must have a dedicated open input and auto-close function enabled.
Includes
1 x e-Loop commercial Presence mode wireless detection module
1 x 2-channel transceiver (e-Trans 200)
2 x Concrete fixing bolts
1 x Magnet
Radar Read Distances
Radar detection range. Spanning from a 60° FOV from the e-loop, these are the range zones. The Gray area depicts the dead zone, in which objects cannot be detected. The Minimum read distance is 0.6m. The default read distance is 1.3m, and the Maximum read distance spans up to 2m.Manufacturer’s Warranty
2 yearsSKU: EL00C-RAD-KLT -
Vehicle Detection
AES Commercial Radar E-Loop Kit with eTrans 100 (Presence Mode) – EL00C-RAD-KT
Presence Mode with added radar protection.
The E-loop commercial is the epitome of perfection when it comes to wireless vehicle detection systems designed specifically for commercial settings. With its wireless nature, installation becomes a breeze, eliminating the need for complex wiring systems and minimizing disruption to the existing infrastructure. Moreover, the system’s efficient energy consumption and low maintenance needs make it a cost-effective solution that ensures long-term reliability.
Additionally, the E-loop commercial is available with a convenient presence mode, which intelligently keeps gates and barriers open for an extended duration when longer vehicles are in motion over the detection area. This advanced functionality enhances safety and efficiency by minimizing interruptions and reducing the risk of collisions, further solidifying its suitability for commercial environments.
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched, and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure A safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Note: Gate or door controller must have a dedicated open input and auto-close function enabled.
Includes
1 x e-Loop commercial Presence mode wireless detection module
1 x 2-channel transceiver (e-Trans 100)
2 x Concrete fixing bolts
1 x Magnet
Radar Read Distances
Radar detection range. Spanning from a 60° FOV from the e-loop, these are the range zones. The Gray area depicts the dead zone, in which objects cannot be detected. The Minimum read distance is 0.6m. The default read distance is 1.3m, and the Maximum read distance spans up to 2m.Manufacturer’s Warranty
2 yearsSKU: EL00C-RAD-KT -
Vehicle Detection
AES e-Loop Inground Commercial Radar Loop Only (PRESENCE MODE) | AES-EL00IG-RAD
The Inground Wireless Vehicle Detection System uses magnetometer sensors to detect the presence and movement of vehicles. These detections are transmitted to a nearby transceiver for gate activation. The sensors are installed in the ground of entry or exit passages using sikaflex, contain a replaceable LIthium battery, and can withstand almost any vehicle. Gate or door controller must have a dedicated open input and autoclose function enabled.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
SKU: EL00IG-RAD -
Vehicle Detection
AES E-Loop Inground Commercial Radar Loop Kit (PRESENCE MODE) | AES-EL00IG-RAD-K
Presence Mode with added radar protection.
The Inground Wireless Vehicle Detection System uses magnetometer sensors to detect the presence and movement of vehicles. These detections are transmitted to a nearby transceiver for gate activation. The sensors are installed in the ground of entry or exit passages using sikaflex, contain a replaceable LIthium battery, and can withstand almost any vehicle. Gate or door controller must have a dedicated open input and autoclose function enabled.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Includes
1 x e-Loop inground Presence mode wireless detection module
1 x single-channel transceiver (Trans-50)
2 x Dyna bolts
1 x Magnet
Features
Lower power consumption / 3-axis magnetometer for vehicle detection
8 Hz sampling rate
Auto-calibration
Exit/Entry detection mode
Fast and simple installation – Quick non-permanent installation
Up to 6-year battery life
Compact design
Compatible with various gates
Reliable radio communications with transceiver
Reliable radio communication
High-security 128-Bit AES Encryption
Dual Sensor Technology
Magnetic Field and radar detection
Magnetometer Detection Areas
Varying magnetic field detection zones. The grey area depicts a 0.6m high sensitivity detection area surrounding the e-loop, suitable for the majority of vehicles. The dark colour area depicts a 1m medium sensitivity detection area surrounding the e-loop, suitable for most vehicles. The light colour depicts a 1.5m low sensitivity detection area surrounding the e-loop, which is only suitable for some vehicles.Radar Read Distances
Radar detection range. Spanning from a 60° FOV from the e-loop, these are the range zones. The Gray area depicts the dead zone, in which objects cannot be detected. The Minimum read distance is 0.6m. The default read distance is 1.3m, and the Maximum read distance spans up to 2m.Manufacturer’s Warranty Period
2 YearsSKU: EL00IG-RAD-K -
Vehicle Detection
AES e-Loop Inground Commercial Radar Loop Kit with LCD Transceiver (PRESENCE MODE) | AES-EL00IG-RAD-KLT
Vehicle DetectionAES e-Loop Inground Commercial Radar Loop Kit with LCD Transceiver (PRESENCE MODE) | AES-EL00IG-RAD-KLT
The Inground Wireless Vehicle Detection System uses magnetometer sensors to detect the presence and movement of vehicles. These detections are transmitted to a nearby transceiver for gate activation. The sensors are installed in the ground of entry or exit passages using sikaflex, contain a replaceable LIthium battery, and can withstand almost any vehicle. Gate or door controller must have a dedicated open input and autoclose function enabled.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Includes
1 x e-Loop inground Presence mode wireless detection module
1 x LCD transceiver (Trans-200)
2 x Dyna bolts
1 x MagnetSKU: EL00IG-RAD-KLT -
Vehicle Detection
AES E-Loop Inground Commercial Controller Presence Mode Inground Kit with ETRANS100 – EL00IG-RAD-KT
Vehicle DetectionAES E-Loop Inground Commercial Controller Presence Mode Inground Kit with ETRANS100 – EL00IG-RAD-KT
AES e-Loop Inground Commercial Radar Loop Kit (PRESENCE MODE) | AES-EL00IG-RAD-K
Presence Mode with added radar protection.The Inground Wireless Vehicle Detection System uses magnetometer sensors to detect the presence and movement of vehicles. These detections are transmitted to a nearby transceiver for gate activation. The sensors are installed in the ground of entry or exit passages using sikaflex, contain a replaceable LIthium battery, and can withstand almost any vehicle. Gate or door controller must have a dedicated open input and autoclose function enabled.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Includes
1 x e-Loop inground Presence mode wireless detection module
1 x single-channel transceiver (Trans-100)
2 x Dyna bolts
1 x Magnet
Features
Lower power consumption / 3-axis magnetometer for vehicle detection
8 Hz sampling rate
Auto-calibration
Exit/Entry detection mode
Fast and simple installation – Quick non-permanent installation
Up to 6-year battery life
Compact design
Compatible with various gates
Reliable radio communications with transceiver
Reliable radio communication
High-security 128-Bit AES Encryption
Dual Sensor Technology
Magnetic Field and radar detection
Magnetometer Detection Areas
Varying magnetic field detection zones. The grey area depicts a 0.6m high sensitivity detection area surrounding the e-loop, suitable for the majority of vehicles. The dark colour area depicts a 1m medium sensitivity detection area surrounding the e-loop, suitable for most vehicles. The light colour depicts a 1.5m low sensitivity detection area surrounding the e-loop, which is only suitable for some vehicles.Radar Read Distances
Radar detection range. Spanning from a 60° FOV from the e-loop, these are the range zones. The Gray area depicts the dead zone, in which objects cannot be detected. The Minimum read distance is 0.6m. The default read distance is 1.3m, and the Maximum read distance spans up to 2m.Manufacturer’s Warranty Period
2 YearsSKU: EL00IG-RAD-KT -
Vehicle Detection
AES EL00M-KT E-Loop Domestic Mini Exit Loop with ETRANS100
Designed for residential applications, this AES Mini E-Loop system features presence mode with magnetic field and radar detection, offering easy installation and full water protection.
The ETRANS100 ensures smooth gate activation and long-lasting performance.
Kit Includes:
- E-Loop Mini Exit mode.
- E-Trans 100.
- (2) Two Concrete fixing bolts.
- 1.5V AA Lithium batteries
SKU: EL00M-K -
Transceivers & Remotes, Vehicle Detection
AES ETRANS100 e-Loop Two Channel Transceiver – ETRANS100
The e-Trans 100 is a versatile mid-range transceiver designed for reliable performance in commercial settings. With two channels and support for up to four loops, it offers dependable control across a wide range of access and automation systems. Engineered for scalability, the e-Trans 100 can manage up to 100 e-TX remotes, making it a practical solution for medium to large installations. Its compatibility with e-Light and e-Light relay systems enhances integration possibilities, while support for both AC and DC power ensures flexible deployment. Housed in a weatherproof enclosure (recommended), the e-Trans 100 delivers long-term durability and consistent operation in diverse environments.
SKU: ETRANS100 -
Transceivers & Remotes, Vehicle Detection
AES e-Trans 200 LCD Transceiver | AES-ETRANS200
The e-Trans 200 is a top-tier transceiver designed for demanding applications requiring reliable and flexible vehicle detection control. Equipped with 2 channels and capable of managing up to 4 loops simultaneously, it delivers high performance for medium to large systems. With a capacity to support up to 200 e-TX remotes and an integrated LCD screen for adjusting advanced settings, the e-Trans 200 offers cutting-edge functionality combined with user-friendly operation. Built for durability, it is recommended to house the unit in a weatherproof plastic enclosure to protect against environmental factors and ensure long-term reliability.
Key features include:
-
Supports 200 e-TX Remotes and 4 e-Loops simultaneously, expanding system scalability
-
Wiring requirements: 12mA at 10-36V DC or 10-26V AC, with optional low current draw (LDC) at 4.5mA
-
Sequence Mode capability for advanced system coordination
-
Enhanced programmability and diagnostic functions to simplify setup and troubleshooting
-
Dual-channel operation providing flexible control options
-
RS-485 communication support for integration with wider control networks
The e-Trans 200 combines robust design with advanced capabilities, making it the ideal choice for complex industrial and commercial vehicle detection systems.
SKU: ETRANS200 -
-
Transceivers & Remotes, Vehicle Detection
AES e-Trans 50 Transceiver | AES-ETRANS50
The e-Trans 50 is a compact and reliable transceiver built to integrate seamlessly with all e-Loop models, supporting up to 4 loops simultaneously. Its streamlined design includes a single NO output relay for simple interfacing with gate or barrier control terminals, making it a smart choice for small to medium-sized commercial setups.
Engineered for dependable performance in varied environments, the e-Trans 50 is best housed within a weatherproof plastic enclosure to protect against moisture, dust, and other environmental stressors. This added protection ensures consistent long-term operation and reduces the likelihood of maintenance interruptions.
With extended range capabilities and solid communication performance, the e-Trans 50 delivers reliable remote control functionality in a wide array of applications. It is a standard component in Commercial, In-Ground, and Mini e-Loop Kits, offering a balanced blend of simplicity, durability, and effectiveness.
-
Supports up to 50 e-TX Remotes and 4 e-Loops
-
1 Channel Operation
-
Power Requirement: 10–36V DC (4.5mA)
-
Reliable single NO output relay
-
Compact design ideal for discrete installations
-
Recommended for use in weatherproof enclosures for optimal longevity
SKU: ETRANS50 -
-
Transceivers & Remotes, Vehicle Detection
AES ETRANS50-TX-KIT E-Trans 50 Transceiver with 4x E-TX and 1x ANT-12
Transceivers & Remotes, Vehicle DetectionAES ETRANS50-TX-KIT E-Trans 50 Transceiver with 4x E-TX and 1x ANT-12
AES long-range gate-opening system offers homeowners unparalleled convenience by eliminating the need to physically approach the gate. With a simple push of a button on a fob (E-TX), homeowners can effortlessly open or close their gates from the comfort of their homes.
With the ability to open gates from up to a range of 350 metres (450/500 metres options). Homeowners can enjoy the ultimate convenience and peace of mind, knowing that their property is secure and easily accessible.
Kit Includes
E-Trans 50 Transceiver
(4) Four E-TX
(1) One ANT-12SKU: ETRANS50-TX-KIT -
Transceivers & Remotes, Vehicle Detection
AES ETRANS50-TX-LR-KIT E-Trans 50 Transceiver with 4 x E-TX and 1x ANT-30
Transceivers & Remotes, Vehicle DetectionAES ETRANS50-TX-LR-KIT E-Trans 50 Transceiver with 4 x E-TX and 1x ANT-30
AES long-range gate-opening system offers homeowners unparalleled convenience by eliminating the need to physically approach the gate. With a simple push of a button on a fob (E-TX), homeowners can effortlessly open or close their gates from the comfort of their homes.
With the ability to open gates from up to a range of 350 metres (450/500 metres options). Homeowners can enjoy the ultimate convenience and peace of mind, knowing that their property is secure and easily accessible.
Kit Includes
E-Trans 50 Transceiver
(4) Four E-TX
(1) One ANT-30SKU: ETRANS50-TX-LR-KIT -
Vehicle Detection
AES E-TX 4 Button Transmitter Key Ring
The e-TX Remote is a sleek and compact controller designed for effortless integration with any product in the e-Trans line. Despite its small size, it delivers robust functionality, making it a practical choice for a wide range of access control needs. Easily programmed in just a few steps, the e-TX is especially well-suited for Single-Loop systems, where simplicity, reliability, and responsiveness are key. With four user-programmable buttons, it enables precise control for open, close, and auxiliary functions, offering flexibility for both standard and custom applications.
SKU: E-TX -
Transceivers & Remotes, Wireless Keypads
Wireless eKeypad (Coin Battery) incl eTrans200 Transceiver + EKPD-KLT
Transceivers & Remotes, Wireless KeypadsWireless eKeypad (Coin Battery) incl eTrans200 Transceiver + EKPD-KLT
Wireless eKeypad (Coin Battery) incl eTrans200 Transceiver
AES Wireless E-Keypad Kit
The e-Keypad offers a sleek access control solution, ideal for systems needing many codes. The keypad features three distinct channels and advanced configuration options for both installers and supervisors. It supports quick installation with just two screws and requires no wiring. Users can store up to 200 unique access codes, including one dedicated supervisor code, with support for simple 4- to 8-digit PIN code operation. Seamless integration with the e-LOOP transceiver range ensures secure entry and effortless exit.KIT CONTENTS
1 x e-Loop wireless e-Keypad.
1x e-trans 200 (Transceiver)SKU: EKPD-KLT
