* Extraordinary Range: Reliable gate operation from up to 350 metres (with upgrade options for 450m and 500m).
* Maximum Convenience: Effortlessly open or close your gates via a handheld fob without leaving your home or vehicle.
* Enhanced Security: Provides peace of mind by ensuring your property remains secure while remaining easily accessible to authorized users.
* Simplified Access: Eliminates the physical effort of manual gate operation through a seamless wireless interface.
Transceivers & Remotes, Vehicle Detection
AES ETRANS50-TX-KIT E-Trans 50 Transceiver with 4x E-TX and 1x ANT-12
AES long-range gate-opening system offers homeowners unparalleled convenience by eliminating the need to physically approach the gate. With a simple push of a button on a fob (E-TX), homeowners can effortlessly open or close their gates from the comfort of their homes.
With the ability to open gates from up to a range of 350 metres (450/500 metres options). Homeowners can enjoy the ultimate convenience and peace of mind, knowing that their property is secure and easily accessible.
Kit Includes
E-Trans 50 Transceiver
(4) Four E-TX
(1) One ANT-12
$450.00
| Brand | AES Global |
|---|---|
| Product Type | Vehicle Detection |
* E-Trans 50 Transceiver
* Operating Frequency: 433.39 MHz
* Power Input: 10V – 36V DC (Wide Voltage Range)
* Current Draw: * Standby: 4.5 mA
* Active: 30 mA
* Relay Output: Single relay with 1-amp contact rating (COM and N/O connections)
* Operational Modes: Pulse, Latch, and Hold (Selectable)
* Memory Capacity: Stores up to 50 remotes, 4 e-Loops, 4 keypads, and 4 entry buttons
* Antenna Connection: SMA connector for standard or long-range external antennas
* E-TX Remote Handset (Fob)
* Encryption: High-security 128-bit AES Encryption
* Frequency: 433.39 MHz
* Buttons: 4 Programmable buttons
* Power Source: 3V CR2032 coin cell lithium battery
* Environmental Protection: IP64-rated robust housing
* ANT-12 External Antenna
* Antenna Gain: 12 dBi high-gain performance
* Connection Type: SMA connector (compatible with E-Trans 50)
* Standard Range: Up to 350 metres (line of sight)
* Extended Range: Compatible with optional high-gain kits for 450m–500m+
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
You may also like…
-
Vehicle Detection
AES E-Loop Commercial Radar Loop Kit (PRESENCE MODE) with eTrans 50 | AES-EL00C-RAD-K
Vehicle DetectionAES E-Loop Commercial Radar Loop Kit (PRESENCE MODE) with eTrans 50 | AES-EL00C-RAD-K
Presence Mode with added radar protection.
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure A safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Note: Gate or door controller must have a dedicated open input and auto close function enabled.
Includes
1 x e-Loop commercial Presence mode wireless detection module
1 x single-channel transceiver (Trans-50)
2 x Dyna boltsSKU: EL00C-RAD-K -
Vehicle Detection
AES Commercial Radar E-Loop Kit with eTrans 100 (Presence Mode) – EL00C-RAD-KT
Presence Mode with added radar protection.
The E-loop commercial is the epitome of perfection when it comes to wireless vehicle detection systems designed specifically for commercial settings. With its wireless nature, installation becomes a breeze, eliminating the need for complex wiring systems and minimizing disruption to the existing infrastructure. Moreover, the system’s efficient energy consumption and low maintenance needs make it a cost-effective solution that ensures long-term reliability.
Additionally, the E-loop commercial is available with a convenient presence mode, which intelligently keeps gates and barriers open for an extended duration when longer vehicles are in motion over the detection area. This advanced functionality enhances safety and efficiency by minimizing interruptions and reducing the risk of collisions, further solidifying its suitability for commercial environments.
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched, and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure A safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Note: Gate or door controller must have a dedicated open input and auto-close function enabled.
Includes
1 x e-Loop commercial Presence mode wireless detection module
1 x 2-channel transceiver (e-Trans 100)
2 x Concrete fixing bolts
1 x Magnet
Radar Read Distances
Radar detection range. Spanning from a 60° FOV from the e-loop, these are the range zones. The Gray area depicts the dead zone, in which objects cannot be detected. The Minimum read distance is 0.6m. The default read distance is 1.3m, and the Maximum read distance spans up to 2m.Manufacturer’s Warranty
2 yearsSKU: EL00C-RAD-KT -
Vehicle Detection
AES Commercial Radar E-Loop Kit with eTrans 200 (Presence Mode) – EL00C-RAD-KLT
Presence Mode with added radar protection.
The E-loop commercial is the epitome of perfection when it comes to wireless vehicle detection systems designed specifically for commercial settings. With its wireless nature, installation becomes a breeze, eliminating the need for complex wiring systems and minimizing disruption to the existing infrastructure. Moreover, the system’s efficient energy consumption and low maintenance needs make it a cost-effective solution that ensures long-term reliability.
Additionally, the E-loop commercial is available with a convenient presence mode, which intelligently keeps gates and barriers open for an extended duration when longer vehicles are in motion over the detection area. This advanced functionality enhances safety and efficiency by minimizing interruptions and reducing the risk of collisions, further solidifying its suitability for commercial environments.
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched, and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure A safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Note: Gate or door controller must have a dedicated open input and auto-close function enabled.
Includes
1 x e-Loop commercial Presence mode wireless detection module
1 x 2-channel transceiver (e-Trans 200)
2 x Concrete fixing bolts
1 x Magnet
Radar Read Distances
Radar detection range. Spanning from a 60° FOV from the e-loop, these are the range zones. The Gray area depicts the dead zone, in which objects cannot be detected. The Minimum read distance is 0.6m. The default read distance is 1.3m, and the Maximum read distance spans up to 2m.Manufacturer’s Warranty
2 yearsSKU: EL00C-RAD-KLT
Related products
-
Transceivers & Remotes, Wireless Keypads
Wireless eKeypad (Coin Battery) incl eTrans200 Transceiver + EKPD-KLT
Transceivers & Remotes, Wireless KeypadsWireless eKeypad (Coin Battery) incl eTrans200 Transceiver + EKPD-KLT
Wireless eKeypad (Coin Battery) incl eTrans200 Transceiver
AES Wireless E-Keypad Kit
The e-Keypad offers a sleek access control solution, ideal for systems needing many codes. The keypad features three distinct channels and advanced configuration options for both installers and supervisors. It supports quick installation with just two screws and requires no wiring. Users can store up to 200 unique access codes, including one dedicated supervisor code, with support for simple 4- to 8-digit PIN code operation. Seamless integration with the e-LOOP transceiver range ensures secure entry and effortless exit.KIT CONTENTS
1 x e-Loop wireless e-Keypad.
1x e-trans 200 (Transceiver)SKU: EKPD-KLT -
Vehicle Detection
AES EL00M-KT E-Loop Domestic Mini Exit Loop with ETRANS100
Designed for residential applications, this AES Mini E-Loop system features presence mode with magnetic field and radar detection, offering easy installation and full water protection.
The ETRANS100 ensures smooth gate activation and long-lasting performance.
Kit Includes:
- E-Loop Mini Exit mode.
- E-Trans 100.
- (2) Two Concrete fixing bolts.
- 1.5V AA Lithium batteries
SKU: EL00M-K -
Vehicle Detection
AES e-Loop Inground Commercial Radar Loop Only (PRESENCE MODE) | AES-EL00IG-RAD
The Inground Wireless Vehicle Detection System uses magnetometer sensors to detect the presence and movement of vehicles. These detections are transmitted to a nearby transceiver for gate activation. The sensors are installed in the ground of entry or exit passages using sikaflex, contain a replaceable LIthium battery, and can withstand almost any vehicle. Gate or door controller must have a dedicated open input and autoclose function enabled.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
SKU: EL00IG-RAD -
Vehicle Detection
AES E-Loop Inground Commercial Controller Presence Mode Inground Kit with ETRANS100 – EL00IG-RAD-KT
Vehicle DetectionAES E-Loop Inground Commercial Controller Presence Mode Inground Kit with ETRANS100 – EL00IG-RAD-KT
AES e-Loop Inground Commercial Radar Loop Kit (PRESENCE MODE) | AES-EL00IG-RAD-K
Presence Mode with added radar protection.The Inground Wireless Vehicle Detection System uses magnetometer sensors to detect the presence and movement of vehicles. These detections are transmitted to a nearby transceiver for gate activation. The sensors are installed in the ground of entry or exit passages using sikaflex, contain a replaceable LIthium battery, and can withstand almost any vehicle. Gate or door controller must have a dedicated open input and autoclose function enabled.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Includes
1 x e-Loop inground Presence mode wireless detection module
1 x single-channel transceiver (Trans-100)
2 x Dyna bolts
1 x Magnet
Features
Lower power consumption / 3-axis magnetometer for vehicle detection
8 Hz sampling rate
Auto-calibration
Exit/Entry detection mode
Fast and simple installation – Quick non-permanent installation
Up to 6-year battery life
Compact design
Compatible with various gates
Reliable radio communications with transceiver
Reliable radio communication
High-security 128-Bit AES Encryption
Dual Sensor Technology
Magnetic Field and radar detection
Magnetometer Detection Areas
Varying magnetic field detection zones. The grey area depicts a 0.6m high sensitivity detection area surrounding the e-loop, suitable for the majority of vehicles. The dark colour area depicts a 1m medium sensitivity detection area surrounding the e-loop, suitable for most vehicles. The light colour depicts a 1.5m low sensitivity detection area surrounding the e-loop, which is only suitable for some vehicles.Radar Read Distances
Radar detection range. Spanning from a 60° FOV from the e-loop, these are the range zones. The Gray area depicts the dead zone, in which objects cannot be detected. The Minimum read distance is 0.6m. The default read distance is 1.3m, and the Maximum read distance spans up to 2m.Manufacturer’s Warranty Period
2 YearsSKU: EL00IG-RAD-KT
There are no reviews yet.