* Simple to use menu functions with LCD display.
* High sensitivity 433 MHz -126 dBm receiver with 20 dBm Transmission
* output.
* External SMA connector to allow for the connection of different antennas.
* Wide input voltage range from 10V to 36V ACDC.
* 2 relay outputs with the ability to set to Pulse, Hold or Latch mode.
* Selectable ultra-low standby power consumption of only 4.5 m/a making it
* ideal for solar applications.
* 200 code storage with remote ID selection making it ideal for unit applications.
* Ability to delete individual remote devices.
* Unique lock-out feature allows you to lock out entry buttons, e-Loops and keypads using the lock and unlock function on the e-Remote.
* Ability to connect to the e-Loop to access menus and change settings.
* Test mode which allows you to test relay outputs, radio signal strength and
* radio interference.
* Manufacturer’s Warranty Period
* 2 Years
AES e-Trans 200 LCD Transceiver | AES-ETRANS200
The e-Trans 200 is a top-tier transceiver designed for demanding applications requiring reliable and flexible vehicle detection control. Equipped with 2 channels and capable of managing up to 4 loops simultaneously, it delivers high performance for medium to large systems. With a capacity to support up to 200 e-TX remotes and an integrated LCD screen for adjusting advanced settings, the e-Trans 200 offers cutting-edge functionality combined with user-friendly operation. Built for durability, it is recommended to house the unit in a weatherproof plastic enclosure to protect against environmental factors and ensure long-term reliability.
Key features include:
-
Supports 200 e-TX Remotes and 4 e-Loops simultaneously, expanding system scalability
-
Wiring requirements: 12mA at 10-36V DC or 10-26V AC, with optional low current draw (LDC) at 4.5mA
-
Sequence Mode capability for advanced system coordination
-
Enhanced programmability and diagnostic functions to simplify setup and troubleshooting
-
Dual-channel operation providing flexible control options
-
RS-485 communication support for integration with wider control networks
The e-Trans 200 combines robust design with advanced capabilities, making it the ideal choice for complex industrial and commercial vehicle detection systems.
$430.00
| Brand | AES Global |
|---|---|
| Product Type | Vehicle Detection |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Vehicle Detection
AES E-Loop Inground Commercial Radar Loop Kit (PRESENCE MODE) | AES-EL00IG-RAD-K
Presence Mode with added radar protection.
The Inground Wireless Vehicle Detection System uses magnetometer sensors to detect the presence and movement of vehicles. These detections are transmitted to a nearby transceiver for gate activation. The sensors are installed in the ground of entry or exit passages using sikaflex, contain a replaceable LIthium battery, and can withstand almost any vehicle. Gate or door controller must have a dedicated open input and autoclose function enabled.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Includes
1 x e-Loop inground Presence mode wireless detection module
1 x single-channel transceiver (Trans-50)
2 x Dyna bolts
1 x Magnet
Features
Lower power consumption / 3-axis magnetometer for vehicle detection
8 Hz sampling rate
Auto-calibration
Exit/Entry detection mode
Fast and simple installation – Quick non-permanent installation
Up to 6-year battery life
Compact design
Compatible with various gates
Reliable radio communications with transceiver
Reliable radio communication
High-security 128-Bit AES Encryption
Dual Sensor Technology
Magnetic Field and radar detection
Magnetometer Detection Areas
Varying magnetic field detection zones. The grey area depicts a 0.6m high sensitivity detection area surrounding the e-loop, suitable for the majority of vehicles. The dark colour area depicts a 1m medium sensitivity detection area surrounding the e-loop, suitable for most vehicles. The light colour depicts a 1.5m low sensitivity detection area surrounding the e-loop, which is only suitable for some vehicles.Radar Read Distances
Radar detection range. Spanning from a 60° FOV from the e-loop, these are the range zones. The Gray area depicts the dead zone, in which objects cannot be detected. The Minimum read distance is 0.6m. The default read distance is 1.3m, and the Maximum read distance spans up to 2m.Manufacturer’s Warranty Period
2 YearsSKU: EL00IG-RAD-K -
Vehicle Detection
AES Commercial Radar E-Loop Kit with eTrans 200 (Presence Mode) – EL00C-RAD-KLT
Presence Mode with added radar protection.
The E-loop commercial is the epitome of perfection when it comes to wireless vehicle detection systems designed specifically for commercial settings. With its wireless nature, installation becomes a breeze, eliminating the need for complex wiring systems and minimizing disruption to the existing infrastructure. Moreover, the system’s efficient energy consumption and low maintenance needs make it a cost-effective solution that ensures long-term reliability.
Additionally, the E-loop commercial is available with a convenient presence mode, which intelligently keeps gates and barriers open for an extended duration when longer vehicles are in motion over the detection area. This advanced functionality enhances safety and efficiency by minimizing interruptions and reducing the risk of collisions, further solidifying its suitability for commercial environments.
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched, and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure A safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Note: Gate or door controller must have a dedicated open input and auto-close function enabled.
Includes
1 x e-Loop commercial Presence mode wireless detection module
1 x 2-channel transceiver (e-Trans 200)
2 x Concrete fixing bolts
1 x Magnet
Radar Read Distances
Radar detection range. Spanning from a 60° FOV from the e-loop, these are the range zones. The Gray area depicts the dead zone, in which objects cannot be detected. The Minimum read distance is 0.6m. The default read distance is 1.3m, and the Maximum read distance spans up to 2m.Manufacturer’s Warranty
2 yearsSKU: EL00C-RAD-KLT -
Transceivers & Remotes, Vehicle Detection
AES ETRANS100 e-Loop Two Channel Transceiver – ETRANS100
The e-Trans 100 is a versatile mid-range transceiver designed for reliable performance in commercial settings. With two channels and support for up to four loops, it offers dependable control across a wide range of access and automation systems. Engineered for scalability, the e-Trans 100 can manage up to 100 e-TX remotes, making it a practical solution for medium to large installations. Its compatibility with e-Light and e-Light relay systems enhances integration possibilities, while support for both AC and DC power ensures flexible deployment. Housed in a weatherproof enclosure (recommended), the e-Trans 100 delivers long-term durability and consistent operation in diverse environments.
SKU: ETRANS100 -
Vehicle Detection
AES E-Loop Commercial Radar Loop Kit (PRESENCE MODE) with eTrans 50 | AES-EL00C-RAD-K
Vehicle DetectionAES E-Loop Commercial Radar Loop Kit (PRESENCE MODE) with eTrans 50 | AES-EL00C-RAD-K
Presence Mode with added radar protection.
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure A safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Note: Gate or door controller must have a dedicated open input and auto close function enabled.
Includes
1 x e-Loop commercial Presence mode wireless detection module
1 x single-channel transceiver (Trans-50)
2 x Dyna boltsSKU: EL00C-RAD-K
There are no reviews yet.