* High-security 128-bit encryption
* Reliable magnetic field detection in exit mode
* Presence mode detection with radar and magnetic field technology
* Fully potted for complete water protection (IP68)
* Detection Method: Utilizes magnetometer sensors to detect the presence and movement of vehicles.
* Transmission: Detections are transmitted wirelessly to a nearby transceiver for gate activation.
* Installation: Sensors are installed on the surface of entry or exit passages using concrete fixing bolts
Vehicle Detection
AES E-Loop Commercial Radar Loop Kit (PRESENCE MODE) with eTrans 50 | AES-EL00C-RAD-K
Presence Mode with added radar protection.
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure A safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Note: Gate or door controller must have a dedicated open input and auto close function enabled.
Includes
1 x e-Loop commercial Presence mode wireless detection module
1 x single-channel transceiver (Trans-50)
2 x Dyna bolts
$575.00
| Brand | AES Global |
|---|---|
| Product Type | Vehicle Detection |
* Size: 4.7″ x 4.7″ x 1.1″
* 11-ton static load limit
* Battery life: 3-4 years
* Range: Up to 50 meters
* Frequency: 433.39 MHz
* Modulation: FSK
* Bitrate: 9.6 kbps
* Bandwidth: 250 kHz
* Antenna Type: PCB
* Nominal Output Power: 10 dBm
* Receive Sensitivity: -126.2 dBm
* Security: 128-Bit AES Encryption
* Small compact design: (120mm x 120mm x
* 30mm high) (4.7” x 1.1”).
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Transceivers & Remotes, Vehicle Detection
AES ETRANS50-TX-KIT E-Trans 50 Transceiver with 4x E-TX and 1x ANT-12
Transceivers & Remotes, Vehicle DetectionAES ETRANS50-TX-KIT E-Trans 50 Transceiver with 4x E-TX and 1x ANT-12
AES long-range gate-opening system offers homeowners unparalleled convenience by eliminating the need to physically approach the gate. With a simple push of a button on a fob (E-TX), homeowners can effortlessly open or close their gates from the comfort of their homes.
With the ability to open gates from up to a range of 350 metres (450/500 metres options). Homeowners can enjoy the ultimate convenience and peace of mind, knowing that their property is secure and easily accessible.
Kit Includes
E-Trans 50 Transceiver
(4) Four E-TX
(1) One ANT-12SKU: ETRANS50-TX-KIT -
Vehicle Detection
AES EL00M-KT E-Loop Domestic Mini Exit Loop with ETRANS100
Designed for residential applications, this AES Mini E-Loop system features presence mode with magnetic field and radar detection, offering easy installation and full water protection.
The ETRANS100 ensures smooth gate activation and long-lasting performance.
Kit Includes:
- E-Loop Mini Exit mode.
- E-Trans 100.
- (2) Two Concrete fixing bolts.
- 1.5V AA Lithium batteries
SKU: EL00M-K -
New Arrivals, Video Intercoms
AES OPYN-MULTI-4G-IB-US 4G Multi-Apartment Telephone Intercom (Surface Mount)
New Arrivals, Video IntercomsAES OPYN-MULTI-4G-IB-US 4G Multi-Apartment Telephone Intercom (Surface Mount)
AES OPYN-MULTI-4G-IB-US 4G Multi-Apartment Telephone Intercom (Surface Mount)
The AES OPYN-MULTI-4G-IB-US is a powerful 4G cellular multi-resident video telephone entry system designed for multi-tenant properties. This surface-mount IP video callbox features an intuitive touchscreen directory and a rugged black powder-coated Imperial enclosure, combining modern functionality with long-term durability.
Visitors use the touchscreen to locate residents and initiate video calls, enabling visual verification and remote access control. This model includes a built-in 4G cellular module, with the cellular router and antenna pre-mounted inside the enclosure for fast, convenient installation—no additional mounting or configuration required.
The surface-mounted enclosure is secured with a key-locked hinged door, allowing easy service access while protecting internal components from tampering and environmental exposure. Designed for outdoor operation, the OPYN-MULTI-4G-IB-US delivers reliable connectivity, professional aesthetics, and simplified installation for high-traffic entry points.
Note: SIM Card Plans are a monthly/yearly subscription purchased separately
5-5-1 PACKAGE DEAL
The Opyn-Multi is here – a modern, Android-based 7” touchscreen system designed for secure, installer-friendly access control. And we’re making it even easier to upgrade your building’s security with our exclusive. 5-5-1 Pre-Order Promotion!
5-5-1 Package Deal:
- 5-year warranty
- 5-year license price lock
- 1-license free for 1 YEAR!
Lock in your pricing from Jan 1, 2026, through Dec 31, 2030, and beat the rising costs for homeowners associations and property managers!
SKU: OPYN-MULTI-4G-IB-US -
Vehicle Detection
AES e-Loop Inground Commercial Radar Loop Only (PRESENCE MODE) | AES-EL00IG-RAD
The Inground Wireless Vehicle Detection System uses magnetometer sensors to detect the presence and movement of vehicles. These detections are transmitted to a nearby transceiver for gate activation. The sensors are installed in the ground of entry or exit passages using sikaflex, contain a replaceable LIthium battery, and can withstand almost any vehicle. Gate or door controller must have a dedicated open input and autoclose function enabled.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
SKU: EL00IG-RAD
There are no reviews yet.