Commercial Property
Showing all 9 results
-
New Arrivals
AES EL00C-B Individual Battery for a Commercial Exit/Presence E-Loop
The EL00C-B is the individual replacement battery designed for the E-Loop Commercial system.
It takes four AA 3.6V batteries and ensures a continuous power supply for reliable operation.
If you need to replace the battery for your E-Loop Commercial system, the EL00C-B is the right choice!
SKU: EL00C-B -
Vehicle Detection
AES E-Loop Commercial Radar Loop Kit (PRESENCE MODE) with eTrans 50 | AES-EL00C-RAD-K
Vehicle DetectionAES E-Loop Commercial Radar Loop Kit (PRESENCE MODE) with eTrans 50 | AES-EL00C-RAD-K
Presence Mode with added radar protection.
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure A safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Note: Gate or door controller must have a dedicated open input and auto close function enabled.
Includes
1 x e-Loop commercial Presence mode wireless detection module
1 x single-channel transceiver (Trans-50)
2 x Dyna boltsSKU: EL00C-RAD-K -
Vehicle Detection
AES Commercial Radar E-Loop Kit with eTrans 200 (Presence Mode) – EL00C-RAD-KT
Presence Mode with added radar protection.
The E-loop commercial is the epitome of perfection when it comes to wireless vehicle detection systems designed specifically for commercial settings. With its wireless nature, installation becomes a breeze, eliminating the need for complex wiring systems and minimizing disruption to the existing infrastructure. Moreover, the system’s efficient energy consumption and low maintenance needs make it a cost-effective solution that ensures long-term reliability.
Additionally, the E-loop commercial is available with a convenient presence mode, which intelligently keeps gates and barriers open for an extended duration when longer vehicles are in motion over the detection area. This advanced functionality enhances safety and efficiency by minimizing interruptions and reducing the risk of collisions, further solidifying its suitability for commercial environments.
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched, and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure A safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Note: Gate or door controller must have a dedicated open input and auto-close function enabled.
Includes
1 x e-Loop commercial Presence mode wireless detection module
1 x 2-channel transceiver (e-Trans 200)
2 x Concrete fixing bolts
1 x Magnet
Radar Read Distances
Radar detection range. Spanning from a 60° FOV from the e-loop, these are the range zones. The Gray area depicts the dead zone, in which objects cannot be detected. The Minimum read distance is 0.6m. The default read distance is 1.3m, and the Maximum read distance spans up to 2m.Manufacturer’s Warranty
2 yearsSKU: EL00C-RAD-KLT -
Vehicle Detection
AES Commercial Radar E-Loop Kit with eTrans 100 (Presence Mode) – EL00C-RAD-KT
Presence Mode with added radar protection.
The E-loop commercial is the epitome of perfection when it comes to wireless vehicle detection systems designed specifically for commercial settings. With its wireless nature, installation becomes a breeze, eliminating the need for complex wiring systems and minimizing disruption to the existing infrastructure. Moreover, the system’s efficient energy consumption and low maintenance needs make it a cost-effective solution that ensures long-term reliability.
Additionally, the E-loop commercial is available with a convenient presence mode, which intelligently keeps gates and barriers open for an extended duration when longer vehicles are in motion over the detection area. This advanced functionality enhances safety and efficiency by minimizing interruptions and reducing the risk of collisions, further solidifying its suitability for commercial environments.
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched, and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure A safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Note: Gate or door controller must have a dedicated open input and auto-close function enabled.
Includes
1 x e-Loop commercial Presence mode wireless detection module
1 x 2-channel transceiver (e-Trans 100)
2 x Concrete fixing bolts
1 x Magnet
Radar Read Distances
Radar detection range. Spanning from a 60° FOV from the e-loop, these are the range zones. The Gray area depicts the dead zone, in which objects cannot be detected. The Minimum read distance is 0.6m. The default read distance is 1.3m, and the Maximum read distance spans up to 2m.Manufacturer’s Warranty
2 yearsSKU: EL00C-RAD-KT -
Vehicle Detection
AES e-Loop Inground Commercial Radar Loop Only (PRESENCE MODE) | AES-EL00IG-RAD
The Inground Wireless Vehicle Detection System uses magnetometer sensors to detect the presence and movement of vehicles. These detections are transmitted to a nearby transceiver for gate activation. The sensors are installed in the ground of entry or exit passages using sikaflex, contain a replaceable LIthium battery, and can withstand almost any vehicle. Gate or door controller must have a dedicated open input and autoclose function enabled.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
SKU: EL00IG-RAD -
Vehicle Detection
AES E-Loop Inground Commercial Radar Loop Kit (PRESENCE MODE) | AES-EL00IG-RAD-K
Presence Mode with added radar protection.
The Inground Wireless Vehicle Detection System uses magnetometer sensors to detect the presence and movement of vehicles. These detections are transmitted to a nearby transceiver for gate activation. The sensors are installed in the ground of entry or exit passages using sikaflex, contain a replaceable LIthium battery, and can withstand almost any vehicle. Gate or door controller must have a dedicated open input and autoclose function enabled.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Includes
1 x e-Loop inground Presence mode wireless detection module
1 x single-channel transceiver (Trans-50)
2 x Dyna bolts
1 x Magnet
Features
Lower power consumption / 3-axis magnetometer for vehicle detection
8 Hz sampling rate
Auto-calibration
Exit/Entry detection mode
Fast and simple installation – Quick non-permanent installation
Up to 6-year battery life
Compact design
Compatible with various gates
Reliable radio communications with transceiver
Reliable radio communication
High-security 128-Bit AES Encryption
Dual Sensor Technology
Magnetic Field and radar detection
Magnetometer Detection Areas
Varying magnetic field detection zones. The grey area depicts a 0.6m high sensitivity detection area surrounding the e-loop, suitable for the majority of vehicles. The dark colour area depicts a 1m medium sensitivity detection area surrounding the e-loop, suitable for most vehicles. The light colour depicts a 1.5m low sensitivity detection area surrounding the e-loop, which is only suitable for some vehicles.Radar Read Distances
Radar detection range. Spanning from a 60° FOV from the e-loop, these are the range zones. The Gray area depicts the dead zone, in which objects cannot be detected. The Minimum read distance is 0.6m. The default read distance is 1.3m, and the Maximum read distance spans up to 2m.Manufacturer’s Warranty Period
2 YearsSKU: EL00IG-RAD-K -
Vehicle Detection
AES e-Loop Inground Commercial Radar Loop Kit with LCD Transceiver (PRESENCE MODE) | AES-EL00IG-RAD-KLT
Vehicle DetectionAES e-Loop Inground Commercial Radar Loop Kit with LCD Transceiver (PRESENCE MODE) | AES-EL00IG-RAD-KLT
The Inground Wireless Vehicle Detection System uses magnetometer sensors to detect the presence and movement of vehicles. These detections are transmitted to a nearby transceiver for gate activation. The sensors are installed in the ground of entry or exit passages using sikaflex, contain a replaceable LIthium battery, and can withstand almost any vehicle. Gate or door controller must have a dedicated open input and autoclose function enabled.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Includes
1 x e-Loop inground Presence mode wireless detection module
1 x LCD transceiver (Trans-200)
2 x Dyna bolts
1 x MagnetSKU: EL00IG-RAD-KLT -
Vehicle Detection
AES E-Loop Inground Commercial Controller Presence Mode Inground Kit with ETRANS100 – EL00IG-RAD-KT
Vehicle DetectionAES E-Loop Inground Commercial Controller Presence Mode Inground Kit with ETRANS100 – EL00IG-RAD-KT
AES e-Loop Inground Commercial Radar Loop Kit (PRESENCE MODE) | AES-EL00IG-RAD-K
Presence Mode with added radar protection.The Inground Wireless Vehicle Detection System uses magnetometer sensors to detect the presence and movement of vehicles. These detections are transmitted to a nearby transceiver for gate activation. The sensors are installed in the ground of entry or exit passages using sikaflex, contain a replaceable LIthium battery, and can withstand almost any vehicle. Gate or door controller must have a dedicated open input and autoclose function enabled.
The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilizes a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.
Includes
1 x e-Loop inground Presence mode wireless detection module
1 x single-channel transceiver (Trans-100)
2 x Dyna bolts
1 x Magnet
Features
Lower power consumption / 3-axis magnetometer for vehicle detection
8 Hz sampling rate
Auto-calibration
Exit/Entry detection mode
Fast and simple installation – Quick non-permanent installation
Up to 6-year battery life
Compact design
Compatible with various gates
Reliable radio communications with transceiver
Reliable radio communication
High-security 128-Bit AES Encryption
Dual Sensor Technology
Magnetic Field and radar detection
Magnetometer Detection Areas
Varying magnetic field detection zones. The grey area depicts a 0.6m high sensitivity detection area surrounding the e-loop, suitable for the majority of vehicles. The dark colour area depicts a 1m medium sensitivity detection area surrounding the e-loop, suitable for most vehicles. The light colour depicts a 1.5m low sensitivity detection area surrounding the e-loop, which is only suitable for some vehicles.Radar Read Distances
Radar detection range. Spanning from a 60° FOV from the e-loop, these are the range zones. The Gray area depicts the dead zone, in which objects cannot be detected. The Minimum read distance is 0.6m. The default read distance is 1.3m, and the Maximum read distance spans up to 2m.Manufacturer’s Warranty Period
2 YearsSKU: EL00IG-RAD-KT -
Gate & Door Openers
AES IGATE-DUAL-US Cellular Gate Opener 2 Relay Output
Unlock access with a call-relay cellular switch with seamless cloud setup and full wireless e-loop compatibility. The AES iGATE-DUAL-US is a powerful, cloud-managed cellular gate opener designed to provide secure, keyless access control for gates, doors, and barriers without the need for landlines, internet, or on-site networking. Using reliable 4G LTE cellular communication, the iGATE enables authorized users to open gates simply by calling or using app-based control.
Featuring 2 relay outputs, the iGATE-DUAL-US allows control of two separate gates or entry points from a single unit—ideal for facilities with multiple access zones. The system can store up to 1,280 authorized phone numbers, making it suitable for residential communities, commercial properties, and industrial sites.
Housed in a rugged IP65-rated enclosure, the iGATE-DUAL-US is suitable for outdoor installation and long-term reliability in harsh environments. Administrators can easily manage users, permissions, and activity logs remotely.
Please Note: This product will be available at the end of September.
GSM Cloud Portal
With the AES Cloud Portal, building managers and installers can remotely program and manage their i-Gate Dual units anytime, from any location.
- Reduce SMS messaging
- User-friendly interface
- Simplified intercom management
- Remote programming
SKU: IGATE-DUAL-US
